The Ford Barn - View Single Post

Shawn · 09-27-2010, 01:36 PM

Hi out there, and thank you for looking. This is a copy of a kurtis track nose I have made. It is made fron 3003 H14 aluminum and .063 in thickness . It was made from six pieces. The rear of the nose has a step down bead for the hood to rest flush. The nose hole opening also has a step down bead, so a grill can rest flush .

09-27-2010, 01:36 PM	#1
Shawn Junior Member Join Date: Sep 2010 Posts: 9	Kurtis Aluminum Track Nose. City: San Jose State: California Price: 450.00 Hi out there, and thank you for looking. This is a copy of a kurtis track nose I have made. It is made fron 3003 H14 aluminum and .063 in thickness . It was made from six pieces. The rear of the nose has a step down bead for the hood to rest flush. The nose hole opening also has a step down bead, so a grill can rest flush . Last edited by Shawn; 02-19-2011 at 02:49 AM.