Quote:
Originally Posted by fiddlybits
Sitting at the bench this afternoon with a distributer in front of me and it occurred to me that the ground side of the upper plate is already "wireless" since it seeks ground through the three tabs that slide in the groove that holds the plate captive. (And that's steel to steel)
Seems to me that making the ignition side wireless, with better conductive metals, if installed right, should not degrade the system at all.
Just sayin........
|
You also have the center hole and a good spring pressing against the top plate. Also make sure the head and distributor shaft that fit into the head are free of rust and paint, so it provides a good ground.