The Ford Barn - View Single Post

YOJIMI · 05-16-2010, 08:18 AM

I run a delco HEI out of a oldsmobile v-8 that I modified on my lathe , took an afternoon , looked at distributor caps till I found 4cyl that fit ,this distributor is self contained , coil and all. 1 wire hook-up. I did this because I didn't have a model A distributor , and wanted to get it running , has centrifical advance and vaccume advance hooked up , so far it has ran great..........
JIMI

05-16-2010, 08:18 AM	#4
YOJIMI Junior Member Join Date: May 2010 Location: Indiana Posts: 23	Re: Non Model A & B Distributors I run a delco HEI out of a oldsmobile v-8 that I modified on my lathe , took an afternoon , looked at distributor caps till I found 4cyl that fit ,this distributor is self contained , coil and all. 1 wire hook-up. I did this because I didn't have a model A distributor , and wanted to get it running , has centrifical advance and vaccume advance hooked up , so far it has ran great.......... JIMI