Quote:
Originally Posted by Tom Wesenberg
Yes, without knowing what cam and lifters, it might be worth pulling the pan to measure the foot of the lifters, or use some blueing to check the contact area. I'm glad someone mentioned about the small lifter size many years ago, or I might have picked the wrong lifters once.  |
Well you did good getting 'bigger feet' , eh
!
I like your thinking, so I went a step further... for the BIGFOOT
!
Chrysler listers from the 50's, that is ! Had Pete here, put a nice matching face on lifters and on cam that he did at same time. That B should rock/roll in near future !