Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 46WINE
Does anyone have an accurate diagram, or can draw an accurate diagram of the mounting hardware for a 1946 Ford. ALSO, where is the oil return from the filter? I know it's not on the pan or on the block like the later models. Maybe, these are dumb questions?
|
The oil filter was not standard equipment on the 46. The return STEEL line
goes to a fitting on the oil pan in front of the dip stick base. (2 or 3 inches) This was not standard either.(the dealer had to install it.) The oil filter became standard in 1947-48 and the return line went into a fitting ON the dip stick base. See the EFV8 restoration book for a good picture of this.