View Single Post
Old 03-04-2014, 07:49 AM   #28
Barry B./ Ma.
Senior Member
 
Barry B./ Ma.'s Avatar
 
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
Default Re: 1930 Steering column support change

Quote:
Originally Posted by 2manycars View Post
That clamp will fit all 30 and 31, except the dropped column models, like the vic and 2dr phaeton. It will also fit the 28-29 if you make a shim, which is either 1/4 inch or 3/8 inch, I cant remember, and drill one hole. I did it to Barry's 29 special coupe.
Yes, good job Bill. For information to others, don't use the lower clamp along with the upper drop bracket, it will set up a horrible vibration that will crack the lower tank area and cause a fuel leak.
Barry B./ Ma. is offline   Reply With Quote