Re: 1930 Steering column support change
Quote:
Originally Posted by Tom Wesenberg
I don't know as I've never used one of them. If the tank is dry and clean around the area to be soldered, the flame should present no problem since it's about 3" back from the tip, which is the part touching the steel and doing the heating and soldering. It's about the same as using the heavy old soldering coppers, but with the torch you have constant heat.
|
If the flame is not near the open end of the gas tank all should be good.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II
|