The Ford Barn - View Single Post - After market upper steering column bushing (Brussegard?)

JM 35 Sedan · 02-18-2014, 05:14 PM

The Brusegard (sp?) upper steering column bearing is the Cadillac of these upper column bearings being offered, but for those not willing to spend that many $$'s there are other lower cost ball bearings that also work well. One is still offered by FoMoCo but I don't have that part number handy. The other option, that I am aware of, is a flanged ball bearing with the correct ID & OD. It is actually a wheelbarrow wheel bearing available at TSC for about $3.00 to $4.00. I will edit this post later with that part number.

These previous posts listed below have pictures and part numbers of these bearings.

http://www.fordbarn.com/forum/showth...column+bearing

http://www.fordbarn.com/forum/showthread.php?t=61577

02-18-2014, 05:14 PM	#5
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,876	Re: After market upper steering column bushing (Brussegard?) The Brusegard (sp?) upper steering column bearing is the Cadillac of these upper column bearings being offered, but for those not willing to spend that many $$'s there are other lower cost ball bearings that also work well. One is still offered by FoMoCo but I don't have that part number handy. The other option, that I am aware of, is a flanged ball bearing with the correct ID & OD. It is actually a wheelbarrow wheel bearing available at TSC for about $3.00 to $4.00. I will edit this post later with that part number. These previous posts listed below have pictures and part numbers of these bearings. http://www.fordbarn.com/forum/showth...column+bearing http://www.fordbarn.com/forum/showthread.php?t=61577 __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein* Last edited by JM 35 Sedan; 02-18-2014 at 05:37 PM.