Thread: How to replace Ignition Switch wires on A Model
View Single Post
Old 01-21-2014, 09:30 PM   #4
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: How to replace Ignition Switch wires on A Model
Do you have the OVAL or the ROUND speedometer? Each one uses a different popout switch. Here are some pictures of the round speedometer popout ignition I replaced a shorted wire on.

http://www.fordbarn.com/forum/showth...ghlight=popout
Tom Wesenberg is offline   Reply With Quote