Quote:
Originally Posted by Lancer
Looks like others have answered the question regarding the ratio OahuEli.
Progress on the internals. Pistons are cleaned and balanced. The vintage pistons are Jahns, and came from Pete Blakeley. Vintage parts in our vintage gasser. Should be darn near 12:1 compression when done. Nice and crispy.
Block pic shows the relief on every cylinder to clear the 2.02" and 1.6" valves when running a .600 lift cam and rocker combo.
|
Lancer, thanks for the mega memories. My first car was a '55 mercury Montclair with a 292. I also bought Jahns pop up pistons for it back in '68. Cost $56 new for a set of 8 if I remember right. You're Y-Block is going to be awesome. Love the fact that you are going al out for HP.
