The Ford Barn - View Single Post

40cpe · 11-10-2013, 03:14 PM

The manufacturer must recognize some possibility of the negative windings contacting the case of the pump. For the sake of safety and the possibility of a failure at some future point, I would isolate the pump from whatever it is mounted to. This would also require rubber hose connections instead of steel tubing connections.

11-10-2013, 03:14 PM	#3
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,161	Re: Airtex fuel pumps The manufacturer must recognize some possibility of the negative windings contacting the case of the pump. For the sake of safety and the possibility of a failure at some future point, I would isolate the pump from whatever it is mounted to. This would also require rubber hose connections instead of steel tubing connections.