Thread: Cleaning threaded block holes
View Single Post
Old 10-10-2013, 07:30 PM   #32
Ross F-1
Senior Member
 
Ross F-1's Avatar
 
Join Date: Nov 2010
Location: NM
Posts: 2,443
Default Re: Cleaning threaded block holes
Quote:
Originally Posted by jack orchard View Post
Not sure if those are the same ones I have, but it appears to be. Mine are made in USA, they work well. They take out lots of crud but no metal.
__________________
'52 F-1, EAB flathead
Ross F-1 is offline   Reply With Quote