The Ford Barn - View Single Post

wrndln · 09-03-2010, 06:50 PM

Droobie,
Thanks for the response. I think I have come to the conclusion that Feather Fill over PPG DPx0 is OK, but the Evercoat technical person I called said the Feather Fill shouldn't be applied for a least 72 hours after applying the epoxy primer. I guess it is because the epoxy need to release any solvents or chemicals before spraying Feather Fill on it. I think the top coat, PPG Concept in my case, could be applied directly over the Feather Fill or DPx0 applied over the Feather Fill to seal it and then apply the top coat.

09-03-2010, 06:50 PM	#22
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,346	Re: Featherfill high build primer Droobie, Thanks for the response. I think I have come to the conclusion that Feather Fill over PPG DPx0 is OK, but the Evercoat technical person I called said the Feather Fill shouldn't be applied for a least 72 hours after applying the epoxy primer. I guess it is because the epoxy need to release any solvents or chemicals before spraying Feather Fill on it. I think the top coat, PPG Concept in my case, could be applied directly over the Feather Fill or DPx0 applied over the Feather Fill to seal it and then apply the top coat.