The Ford Barn - View Single Post

gundoca · 09-08-2013, 06:01 PM

I am in need of a .010 rear main bearing, specifically a 68-6331-L. The block bore is 2.670 and the crank is 2.399. This is not the standard bearing most 38's use, already have a set of those that don't fit.

09-08-2013, 06:01 PM	#1
gundoca Member Join Date: Dec 2012 Location: Lubbock Texas Posts: 70	1938 thick walled rear main bearing City: Lubbock State: TX I am in need of a .010 rear main bearing, specifically a 68-6331-L. The block bore is 2.670 and the crank is 2.399. This is not the standard bearing most 38's use, already have a set of those that don't fit.