The Ford Barn - View Single Post

Gary Duff · 08-08-2013, 03:05 PM

Ken----Replace with NOS Ford switch plate and brush. Fits 32 thru 37.
The remakes are warped junk. I just fixed a 37 that failed on the way home from Tahoe meet. Check the resistance when you are done installing new parts, before you connect wires. Should be .1 ohm or less.

Gary

08-08-2013, 03:05 PM	#2
Gary Duff Junior Member Join Date: May 2010 Posts: 23	Re: Ignition switch failure Ken----Replace with NOS Ford switch plate and brush. Fits 32 thru 37. The remakes are warped junk. I just fixed a 37 that failed on the way home from Tahoe meet. Check the resistance when you are done installing new parts, before you connect wires. Should be .1 ohm or less. Gary