View Single Post
Old 07-15-2013, 05:34 PM   #8
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Re: brake nut question

Confession: When I ran my own shop, I "lost" 2 sets of wheel bearingsin a row, when I ran out of HIGH TEMP DISC BRAKE GREASE while waiting for an order from my oil company. Ran down to Mickey Mouse parts house & grabbed a small can of "ACME"?? all purpose?? bearing grease. Both cars came back later with a constant WHIRRR sound. All the races had minute circular "pot holes"! And I lost an outer front wheel bearing on a '59 Studebaker Lark I had bought because I procrastinated too long before packing the bearings. It didn't "smoke", it just went, SCREEEECH & seized the outer cone to the spindle +*%#^$ Bill W.
Scares me when some say they even use "all-purpose" grease or even chassis grease for wheel bearings!
I'm not a rookie at this, I've seen a LOT of WEIRD stuff happen in my long/screwy "career"!
Just use ONLY a HIGH QUALITY, HIGH TEMP, DISC BRAKE GREASE, torque them to 5 Ft Lbs & you're SAFE!
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote