The Ford Barn - View Single Post

36 CS · 07-13-2013, 11:30 PM

I am using a material that is approx. 1/16"thick and was some left over from waterproofing a basement. It has a paper peel off on one side and I still use a 3m spray glue to install. I think it is a melroll product. It sticks and hard to remove. I ran out and used some leftover window flashing with foil on one side. It is about 8" wide roll which you can buy at most any Lowes or Home Depot.

07-13-2013, 11:30 PM	#7
36 CS Senior Member Join Date: May 2010 Location: Gulf Coast of Alabama Posts: 147	Re: Floor mat and lining I am using a material that is approx. 1/16"thick and was some left over from waterproofing a basement. It has a paper peel off on one side and I still use a 3m spray glue to install. I think it is a melroll product. It sticks and hard to remove. I ran out and used some leftover window flashing with foil on one side. It is about 8" wide roll which you can buy at most any Lowes or Home Depot.