The Ford Barn - View Single Post

jaxV8carz · 06-26-2013, 09:18 AM

After replacing carb and fuel pump, I place my hand on top of the carb and crank the engine. The vacuum generated simply pulls the gas up to the pump. I watch and see the bowl filling and know then that it will fire up.

06-26-2013, 09:18 AM	#8
jaxV8carz Member Join Date: May 2010 Location: Raleigh NC Posts: 33	Re: How to prime the flatty After replacing carb and fuel pump, I place my hand on top of the carb and crank the engine. The vacuum generated simply pulls the gas up to the pump. I watch and see the bowl filling and know then that it will fire up.