[John Burne]

Glad to help. And yes, w/o the S-10 tailstock it would be well under the seat. I saw a friend use a Mustang tail w/ bucket seats and it was quite a ways back. Since you have done this before, I'm sure you will do fine. I will try to get back my notebook from my project. I remember making up a pilot bearing and buying a clutch bracket from Mummert. Had to make a shorter drive shaft. My tranny is tuned so high w/ a 9" rear end that I travel at 70 + on the highway and I can hardly hear it running in 5th. Please keep you eyes open for some extra doors down south. I'll need to replace mine soon as they are bubbling badly at the bottoms. I'll be driving south to Fla this Fall and looking for doors down your way. - John