The Ford Barn - View Single Post

700rpm · 05-17-2013, 08:04 PM

Todd, if you buy a couple good books and read them you will save yourself a whole bunch of money, trouble, and time. I suggest at least The Ford Service Bulletins (complete if you can find them, not the little yellow book — but that's better than none), and Les Andrews's Model A Ford Mechanics Handbook Vol. I. They'll set you back about $60-$80, but well worth it. And they're great reading besides!

05-17-2013, 08:04 PM	#1
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 6,039	Re: Oh Boy. This can't be good!! Todd, if you buy a couple good books and read them you will save yourself a whole bunch of money, trouble, and time. I suggest at least The Ford Service Bulletins (complete if you can find them, not the little yellow book — but that's better than none), and Les Andrews's Model A Ford Mechanics Handbook Vol. I. They'll set you back about $60-$80, but well worth it. And they're great reading besides! __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.