Quote:
Originally Posted by 37slantback
*EDIT*
I got it. The steering column was in back of pickup so I dropped the steering wheel into the end gate valley and pulled the horn rod out.
**
I have the steering column out of my 37 and I am taking it apart. The horn rod will move about 2 feet and then hangs up. I had to do some gentle twists to get it that far. Is there a trick to removing these? It seems in most threads I found that once the bottom clip is removed it should just pull out.
Thanks,
Don
|
Someone in the past may have taken it out while in the car and bent it to get it out. This is not good. A bent horn rod will turn with the wheel and turn the lights on or off! This may be the reason it was hard to remove.