The Ford Barn - View Single Post - Y-Block bellhousing from a Ford truck with a 3 speed

lowandratty · 05-13-2013, 08:31 PM

I did measure the bell tonight and I have a car bell, much smaller bolt pattern than a truck. The truck is 8-1/2 top and bottom, 7-1/4 both sides. car is 7-1/4 both sides but 5-1/4 top and 6-1/4 bottom all measurements are center to center on the bolt holes. This may help other's that are looking at bell housings.

05-13-2013, 08:31 PM	#5
lowandratty Member Join Date: Nov 2012 Posts: 55	Re: Y-Block bellhousing from a Ford truck with a 3 speed I did measure the bell tonight and I have a car bell, much smaller bolt pattern than a truck. The truck is 8-1/2 top and bottom, 7-1/4 both sides. car is 7-1/4 both sides but 5-1/4 top and 6-1/4 bottom all measurements are center to center on the bolt holes. This may help other's that are looking at bell housings.