The Ford Barn - View Single Post - Where/how to mount factory oil filter on a 59ab

Henry/Kokomo · 05-01-2013, 01:57 PM

If you install a stock 59ab oil filter, there are three special nuts which go on the stock studs to hold the filter housing. There is a cylindrical portion on each nut, below the hex portion, that sit in recesses in the filter mounting bracket. This arrangement allows you to use the stock length head studs. FWIW

05-01-2013, 01:57 PM	#9
Henry/Kokomo Senior Member Join Date: May 2010 Location: Kokomo, Indiana Posts: 1,731	Re: Where/how to mount factory oil filter on a 59ab If you install a stock 59ab oil filter, there are three special nuts which go on the stock studs to hold the filter housing. There is a cylindrical portion on each nut, below the hex portion, that sit in recesses in the filter mounting bracket. This arrangement allows you to use the stock length head studs. FWIW __________________ Henry