The Ford Barn - View Single Post - Where/how to mount factory oil filter on a 59ab

ken ct · 05-01-2013, 11:34 AM

I would NOT use spliced rubber oil lines.The original flexible oil lines with the banjo swedched on are impossible to fine in usable shape. Your only option is to hard pipe it. I removed the original setup on my 36 because of line problems. Dont even bothet putting one on its only a by-pass partial filter anyway. Just change the oil a little more often.OMO from experiance with the system. ken ct.

05-01-2013, 11:34 AM	#2
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: Where/how to mount factory oil filter on a 59ab I would NOT use spliced rubber oil lines.The original flexible oil lines with the banjo swedched on are impossible to fine in usable shape. Your only option is to hard pipe it. I removed the original setup on my 36 because of line problems. Dont even bothet putting one on its only a by-pass partial filter anyway. Just change the oil a little more often.OMO from experiance with the system. ken ct.