The Ford Barn - View Single Post

Rodney Racer · 04-15-2013, 05:14 PM

OK-- Tried to enter once, seems like it did not work. I am NEW to this forum, but a long time AACA forum user. So here goes again.
I have a 48 V8 that I need to find an absolute correct plug wire set for a high point restoration.

The NEW set I have is BROWN (correct) but is cracking and brittle causing shorts inside the cap. I do not want another set from this supplier, does anyone know who has a good quality set?

OR shall I buy wire and make my own? If so, who has the correct wire and ends?

Thanks!
Rod

04-15-2013, 05:14 PM	#1
Rodney Racer Junior Member Join Date: Apr 2013 Location: Napa Valley Posts: 8	NEED Correct 1948 Plug Wires OK-- Tried to enter once, seems like it did not work. I am NEW to this forum, but a long time AACA forum user. So here goes again. I have a 48 V8 that I need to find an absolute correct plug wire set for a high point restoration. The NEW set I have is BROWN (correct) but is cracking and brittle causing shorts inside the cap. I do not want another set from this supplier, does anyone know who has a good quality set? OR shall I buy wire and make my own? If so, who has the correct wire and ends? Thanks! Rod