The Ford Barn - View Single Post

36tbird · 04-10-2013, 02:18 PM

What pedal assy do you have in there now? Maybe you are lucky and have a '40 where the clutch pedal was just left off. With that you could get a clutch pedal and an equalizer shaft to use with the appropriate trans adapter. Or, depending what holes remain in the frame, you might adapt a '39 pedal assy where you do not need the equalizer shaft.

I recommend you do searches for threads about '35 to '38 Fords converting to hydraulic brakes. Those are the parts you are going to be searching for. Also, you might include your location in your description in the event there is a 'barner near you that can help.

04-10-2013, 02:18 PM	#2
36tbird Senior Member Join Date: May 2010 Location: nw SanAntonio, TX Posts: 940	Re: clutch pedal assembly What pedal assy do you have in there now? Maybe you are lucky and have a '40 where the clutch pedal was just left off. With that you could get a clutch pedal and an equalizer shaft to use with the appropriate trans adapter. Or, depending what holes remain in the frame, you might adapt a '39 pedal assy where you do not need the equalizer shaft. I recommend you do searches for threads about '35 to '38 Fords converting to hydraulic brakes. Those are the parts you are going to be searching for. Also, you might include your location in your description in the event there is a 'barner near you that can help.