The Ford Barn - View Single Post

36tbird · 04-01-2013, 04:07 PM

The CE kit is what I used in my sedan. As I recall, I drilled new holes in the bottom plates in order to better center the axle in the center of the wheel well. Also, you may have to use shims to adjust the pinion angle.

04-01-2013, 04:07 PM	#9
36tbird Senior Member Join Date: May 2010 Location: nw SanAntonio, TX Posts: 940	Re: Ford 8" in a '36 Tudor? The CE kit is what I used in my sedan. As I recall, I drilled new holes in the bottom plates in order to better center the axle in the center of the wheel well. Also, you may have to use shims to adjust the pinion angle.