03-29-2013, 12:17 PM
|
#9
|
|
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,843
|
Re: Flywheel question
Quote:
Originally Posted by nick c
Chris, you might want to get a copy of Secrets magazine January 2006, page 6 & 7, it has the drawing. There is one misprint on the drawing that was noted in the April 2006 page 35, the dimention 5.735R is actually 5.312R. The April 2006 issue of Secrets has info on the V-8 flywheel pages 14, 15 and 16. I did one 63 lb. model A flywheel on my lathe and turned it down to 36 lb. acording to the drawing.
Good luck, carry on the good work Chris.
nick c
|
Nick,
I don't have a lathe nor do I know anyone with one big enough to handle a flywheel.
__________________
1921 Runabout
1930 Tudor
Early 1930 AA
Speed costs money. How fast do you want to go? 
|
|
|