The Ford Barn - View Single Post

Rich in Tucson · 08-13-2010, 01:21 PM

Check the diameter of the new one if it is repro before pounding it in the hole; I had to turn several thou off of the last one I installed because it was oversized.

08-13-2010, 01:21 PM	#8
Rich in Tucson Senior Member Join Date: May 2010 Location: Tucson, Arizona Posts: 374	Re: Brake & Clutch Pedal Shaft Check the diameter of the new one if it is repro before pounding it in the hole; I had to turn several thou off of the last one I installed because it was oversized.