The Ford Barn - View Single Post

AlanD · 03-07-2013, 11:39 PM

Steve, I didn't know there were different versions used on the Model T. Synder's shows a couple of different gaskets so I was hoping one would be the size I need, which is ID = 2.625, OD = 2.725, thickness = .025
I'll just ask them to measure the ones they sell.

I did cut my own gasket and it will work, but it could be better - ya know.

03-07-2013, 11:39 PM	#4
AlanD Senior Member Join Date: Feb 2012 Location: Louisiana Posts: 117	Re: Carb bowl gasket Steve, I didn't know there were different versions used on the Model T. Synder's shows a couple of different gaskets so I was hoping one would be the size I need, which is ID = 2.625, OD = 2.725, thickness = .025 I'll just ask them to measure the ones they sell. I did cut my own gasket and it will work, but it could be better - ya know.