Quote:
Originally Posted by Shadetree
When I was a youngster my neighbor had a 1942 Chevy pickup. A rod started knocking so we straddled a ditch with the truck and pulled the oil pan. The engine had Babbitt bearings so we found the culprit that was knocking and removed the cap. With a file we took off enough metal from the cap for a good snug fit. While we had it apart we figured it would be worthwhile to do the other five rods. We put it all back together and the engine wouldn't turn over. We towed it and it would scoot the rear tires in 3rd gear. So we straddled the ditch again and removed the pan. We shimmed all of the rods with tin from an evaporated milk can.
It lasted a few days...
|
Awesome story! I say we need more of this stuff
