The Ford Barn - View Single Post

melmallory · 02-26-2013, 11:43 AM

We have had good luck soldering a shunt wire across the two wires comming out of one of the feilds in the horn. This basically puts that feild out of service, allowing the horn's rpm level to stay the same other than double. Did mine quite some time ago still works fine.

02-26-2013, 11:43 AM	#13
melmallory Junior Member Join Date: Feb 2013 Location: Ponca city OK Posts: 5	Re: 6 to 12 V horn conversion We have had good luck soldering a shunt wire across the two wires comming out of one of the feilds in the horn. This basically puts that feild out of service, allowing the horn's rpm level to stay the same other than double. Did mine quite some time ago still works fine.