The Ford Barn - View Single Post

BOSSY · 08-09-2010, 12:34 PM

A lot of PB BLASTER, time, tap back a forth, small pipe wrench. The aluminum has oxidized into the cast iron. Their should be an O ring on it. Good luck.

08-09-2010, 12:34 PM	#2
BOSSY Senior Member Join Date: May 2010 Location: UXBRIDGE, MA. Posts: 316	Re: Distributor is stuck A lot of PB BLASTER, time, tap back a forth, small pipe wrench. The aluminum has oxidized into the cast iron. Their should be an O ring on it. Good luck. __________________ BOSSY