The Ford Barn - View Single Post

Shadetree · 02-02-2013, 01:21 PM

Vic,
Thanks. That is exactly the way my bolts were placed. I had to lift the engine/transmission high enough to clear those bolts and move the old mount high enough to get them out of the way. I know I put a strain on my exhaust pipes lifting it so high. If I can't get the end of the original bolts to clear the frame, I'll use shorter bolts making it easier for the next guy.

The floor pans sure look great on your truck.

Keep an eye on that hydraulic jack!

Bud

02-02-2013, 01:21 PM	#709
Shadetree Senior Member Join Date: May 2010 Location: Cottageville, WV Posts: 1,535	Re: What I Did on My Lunch Hour Vic, Thanks. That is exactly the way my bolts were placed. I had to lift the engine/transmission high enough to clear those bolts and move the old mount high enough to get them out of the way. I know I put a strain on my exhaust pipes lifting it so high. If I can't get the end of the original bolts to clear the frame, I'll use shorter bolts making it easier for the next guy. The floor pans sure look great on your truck. Keep an eye on that hydraulic jack! Bud __________________ Son, you will never blow an engine up in high gear.