View Single Post
Old 08-08-2010, 01:45 PM   #4
Pete
BANNED
 
Join Date: May 2010
Location: Wa.
Posts: 5,423
Default Re: Engine questions

"The bores from the bottom side look good with still evidence of horizontal boring marking in the bores."

If you are describing it correctly, I would not run the engine if you expect it to last very long.
It sounds like the bores were not honed.
There should be NO visable HOROZONTAL lines.
There should be a 45 degree (approx) cross hatch visable.
Pete is offline   Reply With Quote