Re: 26 Tmotor
Steve, he did put a steel gear on it, but after pulling it down i did find that one of the cam lobes is worn down pretty bad. i'll put a new cam and fresh bearings in her, and then use the proper tool for the timing cover and then see how everything fits.
$3,400 and the cam and bearings are worn,the block deck and cyl head was never surfaced the block itself is still rusty and greasy, and what was done is done poorly.
I could have done better doing an in chassis rebuild, live and learn i guess. i think i'll be dropping this motor off at snyders to let them go through it properly.
|