The Ford Barn - View Single Post

FamilyFord · 01-06-2013, 07:33 PM

I finally got the RH head off this afternoon. It was much harder than the LH, stuck on the front studs, for the most part. It is a different picture on this side. Now the story is coming together a little more.
Next Saturday I plan to pull the pan off and see what we've got in there. I'm sure the babbit bearings are present, which might make it more of a challenge in cleaning out the water jackets using a dip method. They are pretty clogged up on this motor. Anyone have suggestions?

Thanks. Chris.

01-06-2013, 07:33 PM	#5
FamilyFord Junior Member Join Date: Jan 2013 Location: Wisconsin Posts: 26	Re: '34 Vicky checking in I finally got the RH head off this afternoon. It was much harder than the LH, stuck on the front studs, for the most part. It is a different picture on this side. Now the story is coming together a little more. Next Saturday I plan to pull the pan off and see what we've got in there. I'm sure the babbit bearings are present, which might make it more of a challenge in cleaning out the water jackets using a dip method. They are pretty clogged up on this motor. Anyone have suggestions? Thanks. Chris.