View Single Post
Old 08-02-2010, 01:58 PM   #40
26Tudor
Junior Member
 
Join Date: May 2010
Location: In the redwoods of NorCal
Posts: 27
Default Re: 1931 Roadster pickup

It's mine 8=)


I have until the end of the month to pick through what I want for the truck, he has offered another passenger's side non-welled fender to go along with it, along with a no-hole splash apron. he has the block that came out of the car in 1963, and the chassis # corresponds with the # on the title.
He took EVERYTHING apart, including the rear end, and there is boxes of parts, new king pins, bearings, etc etc. After I am done, his son is going to come up and get the rest, including the 28-29 RPU body and chassis, and all the rest of the stuff.
The windshield stanchions are/were chrome, but have a little rust on them, but nothing a re-chome wouldn't make beautiful again. I m also getting the commercial painted headlights, and a set of passenger car ones as well.
The speedo is a Stewart-Warner, that he says he had rebuilt back in the 70's sometime.
Everything is NOT "tagged and bagged" as I was told it was... there are 5 gallon buckets of bolts and nuts and washers.
I now am the proud owner of a giant jigsaw puzzle 8=)
Oh, and the windshield frame is no peach, has some rust/separation on the bottom channel, and the chrome is shot, but I think it's fixable, and although I didn't actually see it, he says he has both an electric and a vacuum wiper assembly for it...

Last edited by 26Tudor; 08-02-2010 at 02:13 PM.
26Tudor is offline   Reply With Quote