The Ford Barn - View Single Post

56servi · 12-02-2012, 05:38 PM

I got the driver door panel off. I modified a panel clip removal tool by opening the slot so it would go around the handles between the handle & trim ring. The 2 pins came out with only a little tap on the drift punch. I have had no luck with the other 3 doors. I can get to the pins but can't drive them out. They seem to be stuck in the holes. I tried hitting the drift with a hammer from both sides but can't get them to move.
Any ideas what might cause the pins to be in so tight.

Gene

12-02-2012, 05:38 PM	#7
56servi Senior Member Join Date: Nov 2012 Location: Commerce Twp, Mi Posts: 143	Re: How to replace window glass I got the driver door panel off. I modified a panel clip removal tool by opening the slot so it would go around the handles between the handle & trim ring. The 2 pins came out with only a little tap on the drift punch. I have had no luck with the other 3 doors. I can get to the pins but can't drive them out. They seem to be stuck in the holes. I tried hitting the drift with a hammer from both sides but can't get them to move. Any ideas what might cause the pins to be in so tight. Gene