The Ford Barn - View Single Post - 32 front spring u-bolts

Andy · 11-27-2012, 04:38 PM

nuts should be 1/2 fine thread hex with castellations for the cotter pins. The U bolts should have the holes and be arched on top to go over the crank support.
I pull mine down to at least 80 f-p

11-27-2012, 04:38 PM	#2
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,918	Re: 32 front spring u-bolts nuts should be 1/2 fine thread hex with castellations for the cotter pins. The U bolts should have the holes and be arched on top to go over the crank support. I pull mine down to at least 80 f-p