Sponsored Links (Register now to hide all advertisements)
I just finished mine using a kit from Grain-It Technologies, Inc, in Florida (863) 299 4494. They sell either the whole kit or any component you need. The base coat for 33-34 Fords is called Mahogany MH2 and costs $30 for each spray can. You will need 2 cans for a dash. They offer a lighter color(MH1) and a darker (MH3) as well. Check on the web their demonstration videos, very informative. I attach 2 pictures of my glove box (still has no toner and no clearcoat). The base color turns too dark to me after printing the wood grain but I hope it will look sharper after the clearcoat. The difference in the photos is entirely because of the flash light. Hope it helps. Good luck. Manuel