The Ford Barn - View Single Post - 59A-B parts into an 8BA block

Bob G/Spanaway · 11-23-2012, 05:34 PM

I've been running all 59A external parts on my 8BA in my '40 coupe for 10 years.
The thing I did about crankcase ventilation is use a PCV valve.
Have to use 59A cam & crank gears because the thrust is right direction for 59 front cover and dist.
It works fine.

11-23-2012, 05:34 PM	#8
Bob G/Spanaway Senior Member Join Date: Sep 2011 Location: Spanaway, Washington Posts: 344	Re: 59A-B parts into an 8BA block I've been running all 59A external parts on my 8BA in my '40 coupe for 10 years. The thing I did about crankcase ventilation is use a PCV valve. Have to use 59A cam & crank gears because the thrust is right direction for 59 front cover and dist. It works fine.