The Ford Barn - View Single Post - Questions about trailering from a newbie.

Clydes 31 P/U · 07-31-2010, 06:25 AM

Took me awhile to find these pictures I took of this trailer I made. After I loaded the A and made sure it was where it pulled right, I made blocks from 4X6's cut one side at 45 angle and drilled them and trailer for 3/8 bolts now just drop bolts through the holes and run A up to the blocks and strap it down. I use nylon axle straps around the axles where the wishbone mounts to the axle and 3" nylon ratchet straps. Clyde

07-31-2010, 06:25 AM	#25
Clydes 31 P/U Senior Member Join Date: May 2010 Location: northern Il Posts: 302	Re: Questions about trailering from a newbie. Took me awhile to find these pictures I took of this trailer I made. After I loaded the A and made sure it was where it pulled right, I made blocks from 4X6's cut one side at 45 angle and drilled them and trailer for 3/8 bolts now just drop bolts through the holes and run A up to the blocks and strap it down. I use nylon axle straps around the axles where the wishbone mounts to the axle and 3" nylon ratchet straps. Clyde Last edited by Clydes 31 P/U; 12-15-2010 at 08:25 PM.