The Ford Barn - View Single Post

George/Maine · 07-29-2010, 10:41 AM

When you are raising the voltage "ohms law "you lower the current.By cuting out the resister you increase the current to coil.
You could try only a 12 volt resister.You should try to get the voltage running to 3.5 to 4 volts at coil by adjusting the resister size.

07-29-2010, 10:41 AM	#3
George/Maine Senior Member Join Date: May 2010 Location: Mid coast Maine Posts: 1,878	Re: 41 Ford Starting Problem When you are raising the voltage "ohms law "you lower the current.By cuting out the resister you increase the current to coil. You could try only a 12 volt resister.You should try to get the voltage running to 3.5 to 4 volts at coil by adjusting the resister size.