The Ford Barn - View Single Post - Toe-in Adj. tool

BILL WILLIAMSON · 10-16-2012, 01:56 PM

Always make sure you have NO "slop" in your front wheel bearings as this can FOIL your attempts at getting proper toe in! Also, after resetting toe in, look often at the tire tread & see if it's "scuffing" from the outside in, or from the inside out. Hopefully it will be wearing smooth & even. Bill W.

10-16-2012, 01:56 PM	#36
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Toe-in Adj. tool Always make sure you have NO "slop" in your front wheel bearings as this can FOIL your attempts at getting proper toe in! Also, after resetting toe in, look often at the tire tread & see if it's "scuffing" from the outside in, or from the inside out. Hopefully it will be wearing smooth & even. Bill W. __________________ "THE ASSISTANT GURU OF STUFF"