Quote:
Originally Posted by Ronnie
The machinist is incorrect on the spring orientation the tight coils go towards the guide or the valve head as Walt stated,not the lifter.The vsi this side up goes towards the spring.You have to be able to read this side up before the spring goes on.I know all of this is confusing as the info is all about an overhead valve assembly.Therefor on an "ohv" the tight coils would go on first on top of the shim that you can read this side up all on the head side..The tight coils never go at the retainer end in any assembly.Only on bee hive springs which is another can of worms,Harley Davidson.
|
The above is correct. Walt