The Ford Barn - View Single Post

Marklambert61 · 09-26-2012, 09:10 AM

I cut a small pocket in the fixed side of the clamp and installed an O-ring.
Seems to have work great can't tell it was ever modified after re-assembly.

Mark

09-26-2012, 09:10 AM	#10
Marklambert61 Member Join Date: Aug 2012 Location: Otter Lake MI Posts: 61	Re: slippery wind wings I cut a small pocket in the fixed side of the clamp and installed an O-ring. Seems to have work great can't tell it was ever modified after re-assembly. Mark Last edited by Marklambert61; 09-26-2012 at 10:42 AM.