Quote:
Originally Posted by Rowdy
That will be tough getting $1200 out of a pile of fordor sheetmetal and a near bare frame. We have been selling off 60-B sheetmetal from two cars for afew years. It sells slow so be patient. One we bought the sheetmetal with a running chassis for $1000. I used the chassis for the delivery and we ujsed the splash aprons, radiator, radiator shell, lights and horn for Dad's coupe. So far sold off about $600 in sheetmetal and other pieces. The other one was pretty much a throw in with a rough tudor body. Have not sold much of the sheetmetal off of it yet. It is in tough shape with most of the top pieces missing or near unusable. Rod
|
That is sort of what I was wondering. To me the main parts of use would be the frame with front and rear end, the cowl with windshield frame which is nice, as well as the complete set of six garnish mouldings. Am I off in thinking that the frame might be $200-$500, the cowl section and windshield $350, and the mouldings $300-$450? Of course you still need to find a buyer. All four doors would be ok for someone as well as lots of misc.??