Quote:
Originally Posted by steve norcal
ron ,
im having a simular problem with modern points/condenser . using an alternator . they do not quit me , so far , but burn & cause short life . i change them b 4 they quit . any ideas please ..................... steve
|
Steve, 6 or 12 volt? If you are running on 12 volts or have installed an unknown coil on 6 volts, check the resistance across the coil circuit including resister if used. Shoot for 1 to 1.5 ohm on 6 volts and 2 to 3 ohms on 12 volts.
Rainmaker Ron