The Ford Barn - View Single Post - Pressing New drums onto hubs-wheel stud diameter issue

Big_Guys_baby · 09-12-2012, 03:45 PM

Thanks for the info... Not sure how I am going to handle the next step. I read the post that MuskegonFlatheadfan posted (thanks!) Since I remember the back drums being MUCH less of a deal a few years ago I can only surmise that someone must have replaced them at one time or I just lucked out completely.

What I seem to be understanding is that on the 46's the hub goes on the outside of the drum therefore you need the non-original modern style hub and matching drums (From macs or whereever) if you wanted to run "slip on" style for the fronts... Definitely an appeal to that however I already have a set of the original style drums...

More research on my part is needed. Thanks guys!

09-12-2012, 03:45 PM	#5
Big_Guys_baby Senior Member Join Date: Mar 2011 Location: North Carolina Posts: 191	Re: Pressing New drums onto hubs-wheel stud diameter issue Thanks for the info... Not sure how I am going to handle the next step. I read the post that MuskegonFlatheadfan posted (thanks!) Since I remember the back drums being MUCH less of a deal a few years ago I can only surmise that someone must have replaced them at one time or I just lucked out completely. What I seem to be understanding is that on the 46's the hub goes on the outside of the drum therefore you need the non-original modern style hub and matching drums (From macs or whereever) if you wanted to run "slip on" style for the fronts... Definitely an appeal to that however I already have a set of the original style drums... More research on my part is needed. Thanks guys!